GSR Autosport Community  

Go Back   GSR Autosport Community > Technical Resources > BMW 3 Series (E90/E91/E92/E93) (2006 - Present)

Reply
 
Thread Tools Display Modes
  #1  
Old 02-05-2011, 10:29 PM
Nick_Richards Nick_Richards is offline
Administrator
 
Join Date: Sep 2009
Posts: 56
Default HOW TO: Tail Light Bulb Replacement for BMW 3 Series (E90/E91/E92/E93)

Difficulty:

So easy anyone can do it.

Time:

10 minutes

Parts:
  1. Replacement bulb

Tools:
  1. None


Step 1 – Access Compartment

Open the trunk and there is a removable piece in the trunk liner where the tail light is (see picture below).



Step 2 – Remove Light Assembly

Push up on the clip (shown below) and pull out the tail light assembly.



There are four bulbs. Top two are tail light/brake light. Middle one is reverse light and bottom amber bulb is turn signal.

The top three are all the same type bulb 12V 16W or 18W. BUY

The turn signal is 12V 21W amber color. BUY



Step 3 – Replace Bulb

Top three bulbs pull out directly.

To remove bottom turn signal bulb, push down and then turn.

You should be able to see the broken element in the burnt out bulb.



Step 4 – Reassemble

Replace bulb, reassemble and you are ready to go.


Copyright 2011 GSR Autosport Online
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:03 AM.


Copyright 2009, GSR Autosport